Repelicone L
General purpose water repellent impregnation based on solvent borne Silane/Siloxane
Repelicone L is a ready for use, general purpose single component solvent based silane/siloxane water repellent impregnation for application on vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, mineral plasters and mineral paints.
- Deep penetration into substrate.
- Very good reduction of water and chloride intrusion.
- Excellent resistance to alkalis and UV light.
- Absorbed by the substrate, does not form fi lm and hence does not change or stain the substrate.
- Increases considerably freeze thaw resistance.
- Minimizes efflorescence.
- Breathable, allows for water vapour release.
- Very good resistance to dust and dirt pick-up.
- Repelicone L provides very good water repellency and protection from weathering to vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, and mineral paints.
- Repelicone L can also be used for injection into walls to prevent rising damp.
- Repelicone L can be used as a moisture barrier and primer for exterior paints.
0.1 - 0.4 litre/m² depends on the porosity of the substrate.
Repelicone L is available in 20 litre pails and 200 litre drums.
Repelicone L should be stored under cover at a minimum ambient temperature of 5°C.
Repelicone L has a shelf life of 18 months from date of manufacture if stored in proper conditions and sealed drums.
Repelicone L complies with the requirements of EN 1504-2 Surface Protection Systems for Hydrophobic Impregnation (H) Principles 1.1, 2.1 and 8.1.
