Select Product
Here's the suggested product(s), please select and calculate to know the quantity that you need
Flexseal PU440
One component, non sag, elastomeric polyurethane sealant with high tear and weather resistance
Flexseal PS660
High performance two component polysulphide civil sealant
Flexseal NS901
One component neutral cure high modulus elastomeric silicone weatherproof sealant with mould resistance (Formerly known as Aylaseal 901)
Flexseal NS196
Neutral cure silicone sealant (Formerly known as Aylaseal 196)
Flexseal GA777
General purpose acrylic sealant with mould resistance
Flexseal AS111
Universal silicone sealant (Formerly known as Aylaseal 111)
Flexseal PP800
Elastomeric high performance cold applied fuel resistant pavement joint sealant (Formerly known as Aylaseal 800)
Hints for Application
- Make sure the joint is clean, sound, dry, and free from any contamination.
- Use a joint backing rod to provide the correct joint depth and support the applied sealant.
- Make sure the sealant is not exposed to weathering conditions until it is fully cured.
- Use masking tape on each side of the joint to maintain a clean finish.
- Tool the sealant surface to ensure complete contact and good surface finish. Remove the masking tape directly after tooling.