Flo-Grout BP800
Non shrink cementitious bearing pads precision grout
Flo-Grout BP800 is a pre-mixed, pre-packed, high strength, chloride and hydrogen free cementitious grout. Flo-Grout BP800 is compound of cement, selected additives, well graded fillers, and non-reactive aggregates designed to give excellent flow properties, shrinkage compensation, and high compressive strength.
- Non-shrink grout.
- Suitable for use in hot climates.
- Extremely dense and low permeability.
- High initial and ultimate strength allowing for rapid installation.
- Good flow can be poured or pumped into variable thicknesses down to 10 mm.
- Easy to apply, single component, requires only addition of water.
- Hydrogen and chloride free.
- Non-shrink grout that has dual expansion properties to compensate for shrinkage in both the plastic and hardened stages.
Flo-Grout BP800 is ideally designed for grouting areas beneath bridge bearing pads, pile caps treatment, heavy stanchion bases and base plates where high strength grout is required.
Flo-Grout BP800 is available in 25 kg bags.
Flo-Grout BP800 has a shelf life of 12 months if stored at temperatures between 2°C and 40°C in original unopened bags.
Approximately 14 - 15 litres/ 25 kg bag depending on consistency.
Flo-Grout BP800 complies with U.S. Corps of Engineers Specifications CRD–C588-79 and CRD – C621 and ASTM C1107, Grade C.
