Flo-Grout HT
High flow heat resistant cementitious precision grout
Flo-Grout HT is a pre-mixed, pre-packed, high strength and heat resistant (up to 400°C) cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregate designed to give excellent flow properties, shrinkage compensation, and high compressive strength.
Downloads
Flo-Grout HT_TDS.pdf
TDS
Flo-Grout HT_MSDS.pdf
SDS
Flo-Grout HT_MS.pdf
MS
- Non-shrink grout.
- Suitable for use in hot areas.
- Extremely dense and low permeability.
- High early strength development allowing for rapid installation.
- High flow, can be poured or pumped into variable gab widths down to 10 mm.
- Easy to apply, single component which requires only addition of water.
- Chloride free.
Flo-Grout HT is ideally designed for grouting areas where high temperature resistance and high early strength grout is required.
Flo-Grout HT is available in 25 kg bags.
Flo-Grout HT has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C in original unopened bags.
Approximately 13 – 14 litre/25 kg bag depending on consistency.
- Flo-Grout HT complies with U.S. Corps of Engineers Specifications CRD – C588-79 and CRD – C621 in term of workability.
- ASTM C1107, Grade A.