Strongcoat SL1
1 - 2 mm thick epoxy self leveling topping for floor surfaces
Strongcoat SL1 is a solvent-free, epoxy-based, self-leveling topping that provides floor surfaces with a seamless, hygienic, and visually appealing finish. It is applied by trowel to horizontal surfaces and offers excellent durability against both pedestrian and vehicular traffic.
Strongcoat SL1 also demonstrates outstanding resistance to many chemicals commonly found in industrial environments. Available in a variety of colours, it cures to form a hard-wearing, long-lasting surface.
- Provides hygienic floor.
- Hard wearing system.
- Solvent free.
- Available in a wide range of attractive colours.
- Resistant to a wide range of chemicals.
Strongcoat SL1 is used to provide a hygienic, dense and hard wearing surface for concrete floors for a wide range of applications such as:
- Aircraft hangars.
- Hospitals.
- Pharmaceutical factories.
- Showrooms.
- Laboratories.
- Medium or light duty industrial plants.
- Kitchens.
A) Typical smooth finish:
Refer to the Strongcoat Primer Range TDS for coverages and thicknesses.
Strongcoat SL1: 1000 - 2000 microns (DFT) per layer.
B) Typical Antislip Finish (indoor and outdoor):
Refer to the Strongcoat Primer Range TDS for coverages and thicknesses.
Strongcoat SL1: 1000 - 2000 microns (DFT) per layer.
Antislip Aggregate No.2 or 3: 1 - 3 kg/m2.
Repcoat P: 1 - 2 coats @ 75 - 100 microns (DFT) per coat.
Strongcoat SL1 is available in 17 kg packs (10.5 litre).
Strongcoat SL1 and Primer have a shelf life of 12 months from date of manufacture if stored at temperatures between 10°C and 35°C.
The material may form crystals when stored at temperatures below 10˚C, in such cases, conditioning for 1 - 2 days at temperatures between 30 - 35˚C with simple manual mixing is needed before application.
Strongcoat SL1 complies with EN 13813, SR-B1.5-AR0.5-IR2.9.
