Cookie Consent by FreePrivacyPolicy.com

Strongcoat Topping

Heavy duty epoxy topping for floor surfaces

Strongcoat Topping is a three-pack solvent free, epoxy based topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.

Strongcoat Topping is applied by trowel and can be coved and laid to falls and has a very good durability towards pedestrian and vehicular traffic.

It also has very good resistance towards many of the chemicals commonly found in an industrial environment (consult our Technical department for further details).

Strongcoat Topping has a finish that provides very good slip resistance and can be supplied in a natural colour and variety of colours, it is also available in a decorative quartz finish (consult our Sales Department for details).

Downloads
Strongcoat Topping_TDS_8.pdf
TDS
Strongcoat Topping_MS.pdf
MS
Strongcoat Topping - Base_0.pdf
SDS_Base
Strongcoat Topping - Filler_0.pdf
SDS_Filler
Strongcoat Topping - Hardener_0.pdf
SDS_Hardener
  • Extremely hard wearing system.
  • Solvent free.
  • Non-slip.
  • Available in a wide range of attractive colours.
  • Available in a decorative quartz finish.
  • Resist a wide range of chemicals, consult DCP technical department for more details.

Strongcoat Topping is used to provide a hygienic, dense and extremely hard wearing surface for concrete floors for a wide range of applications such as:

  • Heavy industry factories.
  • Aircraft hangars.
  • Paint workshops.
  • Steel works.
  • Dairies.
  • Chemical factories.
  • Oil refineries.
  • Freezers and refrigerated storage (at 5 mm thickness).

Strongcoat Topping: Approximately 3 m²/kit @ 5 mm thick.
Strongcoat Primer: 5 m²/kg.

Strongcoat Topping 'natural' is available in 29.35 kg packs (14.7 litre).
Strongcoat Topping 'coloured' is available in 30 kg packs (15 litre) including colour pack.
Strongcoat Primer is available in 5 kg packs.

Strongcoat Topping and Primer have a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 30°C.

  • Strongcoat Topping complies with EN 13813, SR-B2.0-AR0.5-IR10.