Cookie Consent by FreePrivacyPolicy.com

Strongcoat SL2

Self leveling topping for floor surfaces

Strongcoat SL2 is a solvent free, epoxy-based self leveling topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.

Strongcoat SL2 is applied by trowel to horizontal surfaces and has very good durability towards pedestrian and vehicular traffic. It also has very good resistance to many of the chemicals commonly found in an industrial environment (consult our Technical Department for further details). It can be supplied in a variety of colours (consult our Sales Department for details).

Strongcoat SL2 cures to a durable, hard wearing surface.

Downloads
Strongcoat SL2_TDS_2.pdf
TDS
Strongcoat SL2_MS_2.pdf
MS
Strongcoat SL2 - Base_MSDS_1.pdf
SDS_Base
Strongcoat SL2 - Filler_MSDS_1.pdf
SDS_Filler
Strongcoat SL2 - Hardener_MSDS_2.pdf
SDS_Hardener
  • Provides hygienic floor.
  • Hard wearing system.
  • Solvent free.
  • Available in a wide range of attractive colours.
  • Resist a wide range of chemicals, consult DCP technical department for more details.

Strongcoat SL2 is used to provide a hygienic, dense and hard wearing surface for concrete floors for a wide range of applications such as:

  • Aircraft hangars.
  • Hospitals.
  • Pharmaceutical factories.
  • Showrooms.
  • Laboratories.
  • Heavy or light duty industrial plants.
  • Kitchens.

Strongcoat SL2: Approximately 6 m²/kit @ 2 mm thick.
Strongcoat Primer S: Approximately 5 m²/kg.
Actual coverage can vary depending on the substrate conditions.

Strongcoat SL2 is available in 19 kg packs (11.9 litre).
Strongcoat Primer S is available in 5 kg packs.

Strongcoat SL2 and Primer have a shelf life of 12 months from date of manufacture if stored at temperatures between 10°C and 35°C.

The material may form crystals when stored at temperatures below 10˚C, in such cases, conditioning for 1 - 2 days at temperatures between 30 - 35˚C with simple manual mixing is needed before application.

  • Strongcoat SL2 complies with EN 13813, SR-B2.0-AR0.5-IR4.7.