
Flo-Grout 2
General purpose non-shrink cementitious grout
Flo-Grout 2 is pre-mixed, pre-packed chloride free cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.

Downloads
Flo-Grout 2_MSDS_11.pdf
SDS
Flo-Grout 2_TDS_1.pdf
TDS
Flo-Grout 2_MS_2.pdf
MS
- Good non-shrinkage characteristics.
- Extremely dense and low permeability.
- High early strength development allowing for rapid installation.
- High flow can be poured or pumped into variable gap widths down to 10 mm.
- Easy to apply, single component which require only addition of water.
Flo-Grout 2 is ideally designed for use in the following applications:
- Machine beds.
- Stanchion bases, struts, railings, and guardrail assemblies.
- Filling of shutter tie rod openings.
- Anchoring of tie bars, and bolts.
- Pile top re-profiling.
Flo-Grout 2 is available in 25 kg bags.
Flo-Grout 2 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
Approximately 12.5 - 13 litre/25 kg bag depending on consistency.
Flo-Grout 2 complies with ASTM C1107, Grade A.