Flocrete P10
Water reducing admixture
Flocrete P10 is formulated from selected polymers specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used to improve workability, to increase ultimate strengths or to facilitate a reduction in the cement content while sustaining mix properties.
- Improved workability, reduces placing and compaction problems.
- Cold joints can be avoided by extending initial and final concrete setting time.
- Higher strength with same cement content.
- Cement saving without affecting strength.
- More durable concrete as a result of reduction in permeability and lower water to cement ratio.
- To produce high quality concrete of improved durability and water tightness.
- To improve cohesion in concrete mixes.
Flocrete P10 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Flocrete P10 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The guidance dosage of Flocrete P10 is 0.2 - 1.4 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Flocrete P10 to meet the performance requirements by using the materials and conditions in actual use.
Flocrete P10 complies with ASTM C494, Type A & D, depending on dosage used, EN 934-2 Table 2 and with BS 5075, Part 1.
