Cookie Consent by FreePrivacyPolicy.com

Flocrete WP Crystal

Powder waterproofing crystalline admixture

Flocrete WP Crystal is powder waterproofing admixture formulated from selected organic salts and very fine treated silica specially designed to reduce the
permeability in all cement based mortars, screeds and concrete. Flocrete WP Crystal blocks the natural pores in the mix and imparts the hydrophobic properties which reduce moisture permeability.

Unique properties of Flocrete WP Crystal active organic chemicals reacts with the moisture in fresh concrete and generates non soluble crystal and block the pores during active hydration of cement particle. The concrete admixed with Flocrete WP Crystal become permanently sealed against water penetration from all sides, which also increases the ultimate strength of concrete.

The advanced waterproofing properties of Flocrete WP Crystal also protect reinforcement against corrosion, harsh environment and waterborne chemicals like sulfates, acids and chlorides, increasing the durability and life span of concrete.

Downloads
Flocrete WP Crystal_TDS_6.pdf
TDS
Flocrete WP Crystal_7.pdf
SDS
  • Improves durability by minimizing penetration of moisture and water based chemicals.
  • No additional water into dry or semi-dry mixes.
  • Reduces efflorescence and pigment leaching from cement mortars.
  • Chloride free.
  • Added into the concrete at time of batching.
  • Resists hydrostatic pressure from all direction, allow concrete to breathe.
  • Can heal static cracks up to 0.5 mm.
  • Active material for the entire life of concrete.
  • Permanently waterproofs concrete.
  • Protection against corrosion.
  • Non toxic.
  • Zero VOC content.
  • Saves construction time and cost by eliminating the need for external membrane as well as reduced labour number.
  • Enhances performance of concrete by reducing permeability by at least 70%.
  • Enhances concrete hydrophobicity and repellency properties.
  • No special addition precautions.
  • Increases ultimate strength of concrete.

Flocrete WP Crystal is a waterproofing admixture for use in all cement based mortars, screeds and concrete.
it is recommended to be used for:

  • Reservoirs.
  • Sewage.
  • Water treatment plants.
  • Underground vaults.
  • Foundations.
  • Swimming pools.
  • Parking structures.
  • Basements.
  • Elevator pits.
  • Traffic tunnels.
  • Below grade pipelines.
  • Bridges.
  • Dams.
  • Highway infrastructure.
  • Precast concrete.
  • Cast-in-Place concrete.
  • Shotcrete.

Flocrete WP Crystal is available in 5, 10 and 25 kg bags.

Flocrete WP Crystal has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Flocrete WP Crystal ranges from 0.8 - 2 kg per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Flocrete WP Crystal to meet the performance requirements by using the materials and conditions on actual use.