Cookie Consent by FreePrivacyPolicy.com

Formcoat SX

Solvent based formwork release agent

Formcoat SX is a high performance, formwork release agent consists of a unique blend of solvent borne mineral oil and other selective additives which are formulated to prevent the adhesion of newly poured concrete to formworks and thus, reducing the damage and ensuring a high quality, fair faced and stain free concrete with excellent surface finish.

Downloads
Formcoat SX_TDS.pdf
TDS
Formcoat SX_MSDS.pdf
SDS
Formcoat SX_MS.pdf
MS
  • Easy release, reduces damage to concrete surface and improves finish.
  • Minimizes surface blemishes and staining.
  • Improves fair-faced concrete quality.
  • Reduces opportunity of damage to formwork.
  • Extends formwork usable life.
  • Minimizes cleaning of formwork before re-use.
  • Inhibits corrosion of steel formwork.

Formcoat SX is used as a release agent for all common types of absorbent and non-absorbent formwork allowing for easy stripping of formwork and improving concrete finish.

The actual coverage rate of Formcoat SX depends on the type and absorbency of the formwork.
Typically, Formcoat SX should be applied at 10 - 15 m2/ litre per coat for highly absorbent formworks such as new and unsealed timber surfaces and at a rate of 30 - 50 m2/ litre per coat over non-absorbent surfaces.

Formcoat SX is available in 25 litre jerrycan and 210 litre drums.

Formcoat SX has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums. Formcoat SX should be stored under a shaded area at a minimum ambient temperature of 5°C.