Cookie Consent by FreePrivacyPolicy.com

Hyperplast PC550

High performance concrete admixture based on polycarboxylic polymers

Hyperplast PC550 is a high performance superplasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Hyperplast PC550_TDS.pdf
TDS
  • Optimises cement utilization.
  • Increases durability and resistance to aggressive
  • atmospheric conditions thorough reduced permeability.
  • Higher early and ultimate compressive strengths.
  • High density and impermeable concrete through very high water reduction.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Improves shrinkage and creep behaviors.
  • High strength and high performance concrete.
  • Pre-cast concrete.
  • Self compacting concrete.
  • Improved cohesion allow for use in mass concrete pours and piling.
  • Structures with congested reinforcement.

Hyperplast PC550 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.

Hyperplast PC550 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Hyperplast PC550 is 0.5 - 2.0 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Hyperplast PC550 to meet the performance requirements by using the materials and conditions in actual use.

Hyperplast PC550 complies with ASTM C494, Type G and BS EN 934, Part 2, Table 11.1.