Cookie Consent by FreePrivacyPolicy.com

Keyfix E

Epoxy resin cartridge system for anchoring

Keyfix E is a two component high strength pure epoxy resin anchoring grout pre-packed in dual cartridge system with fast curing rate.

Keyfix E is formulated for permanent installation of steel reinforcement bars and threaded rods into concrete substrates in structural applications.

Downloads
Keyfix E_TDS_11.pdf
TDS
Keyfix E_MS_5.pdf
MS
Keyfix E - Base_MSDS_17.pdf
SDS_Base
Keyfix E - Hardener_MSDS_18.pdf
SDS_Hardener
  • Exceptional rapid strength development.
  • Resistant to dynamic loading.
  • Exceptional high compressive.
  • Extremely dense.
  • Exceptional bond to concrete and steel surfaces.
  • Suitable for dry and damp concrete holes.
  • Good chemical resistance.
  • High ultimate and early strengths.
  • Non-sag consistency suitable for overhead applications.

Keyfix E is ideally designed for use in the following applications:

  • Permanent installation of reinforcement starter bars and dowel bars.
  • Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors.

Keyfix E is available in 400 ml or 380 ml twin cartridge system.

Keyfix E has a shelf life of 12 months from the date of manufacture if stored in its original packaging at temperatures above 8°C and away from direct sunlight.

If crystallization has occurred due to low temperature storage conditions (typically below 5°C), condition the product at temperatures around 30°C for several days before application.

  • Keyfix E evaluated in accordance with the EOTA TR023 “Assessment of post-installed rebars connections”.
  • Keyfix E when tested at normal temperature complies with the requirements of ASTM C881, Types I, II*, IV and V*, Grade 3, Class C. (*Except for gel time).