Quickmast 110
Polyurethane resin based injection system
Quickmast 110 is a two-component; low viscosity moisture reactive polyurethane system which when reacts with water and expands to form a closed-cell
foam barrier. Quickmast 110 is used in conjunction with Quickmast 120 for permanent and effective sealing of live cracks.
Downloads
Quickmast 110_TDS - qatar.pdf
TDS
Quickmast 110 - Base_MSDS_0.pdf
SDS_Base
Quickmast 110 - Hardener_MSDS_3.pdf
SDS_Hardener
Quickmast 110&120_MS.pdf
MS
- Excellent bond strength to concrete, brickwork, and masonry.
- Low viscosity polyurethane system, formulated to allow cracks penetration.
- Rapid reaction with water; will stop water leakage problems.
- Outstanding resistance to hydrostatic pressure.
- Used with Quickmast 120 to form a permanently elastic seal.
- Exhibit good chemical resistance.
- Non-toxic, suitable for use in contact with potable water.
For injection of wet cracks in all types of structural concrete elements, masonry, and brickwork.
Quickmast 110 is available in 1 and 5 litre packs.
Quickmast 110 has a shelf life of 6 months from date of manufacture if stored at temperatures between 10 and 30°C in dry conditions and original sealed containers.
- Quickmast 110 is suitable for use in contact with potable water when tested in accordance to BS 6920.
