Cookie Consent by FreePrivacyPolicy.com

Strongcoat Conductive

Flow-applied electrostatic discharge (ESD) epoxy coating

Strongcoat Conductive is a flow applied solvent free, electrostatic conductive epoxy floor coating especially designed to provide electrostatic control properties to a variety of substrates in wide range of applications.

Strongcoat Conductive comprises of an epoxy primer, conductive base coat and 2.0 mm flow applied topcoat.

Downloads
Strongcoat Conductive_TDS_8.pdf
TDS
Strongcoat Conductive Basecoat - Base_MSDS_4.pdf
SDS_Base
Strongcoat Conductive Basecoat - Hardener_MSDS_4.pdf
SDS_Hardener
Strongcoat Conductive Topcoat - Base_MSDS_4.pdf
SDS_Base
Strongcoat Conductive Topcoat - Filler_MSDS_4.pdf
SDS_Filler
Strongcoat Conductive Topcoat - Hardener_MSDS_4.pdf
SDS_Hardener
Strongcoat Conductive_MS_1.pdf
MS
  • Provide a conductive floor for static electricity to pass through to earth controlling static electricity.
  • Provide anti-spark (spark-proof) whenever required for safety to prevent sparks.
  • Alternative smooth finish.
  • Hard wearing surface that can be subjected to heavy foot traffic and forklift traffic.
  • Chemical resistant.

Strongcoat Conductive is suitable for use in areas where a static conductive floor is required, such as:

  • Electronic manufacturing facilities.
  • Hospital operation theatres.
  • Hazardous dust and chemical environments.
  • Data processing areas.
  • Military and aerospace facilities.

Strongcoat Primer: 5 m²/kg.
Strongcoat Conductive Top Coat: 3.2 kg/m².
Strongcoat Conductive Base Coat: 4.5 m²/kg.

Actual coverage can vary depending on the substrate conditions.

Strongcoat Primer: 5 kg packs.
Strongcoat Conductive Top Coat: 15 kg packs.
Strongcoat Conductive Base Coat: 5 kg packs.

Strongcoat Conductive has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 30°C.