Cookie Consent by FreePrivacyPolicy.com

Strongcoat HB

High-build epoxy floor coating

Strongcoat HB is a high build, hard wearing, solvent free epoxy resin coating, designed to provide a hard, gloss coating to concrete floors. It is supplied as two pack material in preweighted quantities ready for on site mixing and use.

Strongcoat HB permits the application of floor coatings in excess of 200 microns per coat and can be coloured to suit site requirements.

With the addition of Antislip Aggregate (Slip resistant aggregate No. 2 or 3) between coats, slip resistant floor system can be achieved with a build up thickness between 1.25 to 2 mm.

Downloads
Strongcoat HB_TDS_16.pdf
TDS
Strongcoat HB Base_MSDS_5.pdf
SDS_Base
Strongcoat HB Hardener_MSDS_2.pdf
SDS_Hardener
Strongcoat HB_MS_7.pdf
MS
Advantages
  • Produces a seamless, glossy, glass-like surface that is both easy to clean and does not induce bacterial and fungal growth.
  • High chemical and mechanical resistance.
  • Available in a wide range of attractive colours.
  • Cost effective.
  • Easy application.
  • High build.
  • Hydrocarbon resistant.
Applications

Strongcoat HB is used as protective, decorative, high chemical resistance and hard wearing floor coating system for a wide range of applications including:

  • Aircraft hangars.
  • Car parks.
  • Soft drink and beverage production areas.
  • Dairies production areas.
  • Show rooms.
  • Hospitals.
  • Production, maintenance and assembly areas.
  • Warehouses.
  • General food processing and manufacturing plants.
Coverage

Standard coverage:

Strongcoat Primer S: 5 m²/kg.
Strongcoat HB (base coat): 0.28 - 0.29 kg/m².
Strongcoat HB (top coat): 0.28 - 0.29 kg/m².
Approximate system thickness: 500 - 600 microns.

Antislip coverage when used with Antislip Aggregate #2 to achieve medium texture:

Strongcoat Primer S: 5 m²/kg.
Strongcoat HB (base coat): 0.35 kg/m².
Antislip aggregate #2: 2.0 – 4.0 kg/m².
Strongcoat HB (top coat): 0.45 kg/m².
Approximate system thickness: 2.0 mm.

Antislip coverage when used with Antislip Aggregate #3 to achieve fine texture:

Strongcoat Primer S: 5 m²/kg.
Strongcoat HB (base coat): 0.30 kg/m².
Antislip aggregate #3: 2.0 – 4.0 kg/m².
Strongcoat HB (top coat): 0.40 kg/m².
Approximate system thickness: 1.25 mm.

Packaging

Strongcoat HB is available in 6 kg packs (4.25 litre), 18 kg packs (12.75 litre) and 30 kg packs (21.3 litre).

Storage

Store in a dry area out of direct sunlight at temperatures between 5°C and 35°C.

Strongcoat HB has a shelf life of 12 months from date of manufacture if stored in proper conditions and unopened packs.

Standards
  • Strongcoat HB complies with the requirements of EN 1504-2, Surface Protection Systems principle 5.1.