Cookie Consent by FreePrivacyPolicy.com

Flocrete Antifreeze Plus

Set accelerating and antifreeze admixture for concrete poured at low temperatures

Flocrete Antifreeze Plus is a multi-component concrete additive in liquid form for producing high quality concrete at very low temperatures. Flocrete Antifreeze Plus is chloride free.

Downloads
Flocrete Antifreeze Plus_0.pdf
SDS
Flocrete Antifreeze Plus_6.pdf
TDS

Flocrete Antifreeze Plus provides for the following:

  • Improved workability without increased water content.
  • Reduction in water without loss of workability.
  • Increased frost resistance.
  • Improved early and long term strengths.
  • Chloride free - does not attack reinforcement.

Flocrete Antifreeze Plus is recommended for use in conditions such as:

  • Concrete casting at low temperatures.
  • To obtain concrete with incrased initial strength, or to achieve rapid hardening concrete.

Flocrete Antifreeze Plus is available in 1000 litres containers.

Store in dry conditions. Flocrete Antifreeze Plus has a minimum shelf life of 12 months if stored properly in its original unopened packing.

Dosage of Flocrete Antifreeze Plus will vary depending on cement content and outside temperature. Required dosage should be determined for each case.
Typical dosage is between 1 - 2 kg per 100 kg of cement content. Dosages outside the typical range given above may be used to meet particular requirements.

Flocrete Antifreeze Plus complies with ASTM C 494 standard, Type C and E, BS 5075 and SR EN 934-2, Table 6.