Bituproof FLX SA
Water based elastomeric rubberized bitumen waterproof coating
Bituproof FLX SA is a water based bitumen waterproof coating modified with acrylic polymers, formulated from selected raw materials to form a high build elastomeric waterproof and protective coating for concrete and masonry.
Downloads
Bituproof FLX SA_TDS.pdf
TDS
Bituproof FLX SA_MSDS.pdf
SDS
Bituproof FLX SA_MS_0.pdf
MS
- One component – ready to use.
- Elastomeric will bridge minor cracks which may occur in concrete substrates.
- Extremely high elongation.
- Excellent adhesion to a wide range of substrates.
- Resists attack by chloride and sulphate ions present in ground water.
- Solvent free, non-flammable.
- Asbestos free.
- Rot resistant.
Bituproof FLX SA provides a waterproof coating for:
- Retaining walls.
- Foundations and basements.
- Wet areas (Under Tiles).
- Repairs of existing bitumen surfaces and membranes.
- Shaded or tiled roofs.
- 3 - 5 m2/litre per coat, as protective coating.
- 1 - 1.5 m2/litre per coat, as waterproof coating giving a dry film thickness of 500 microns per coat. Two coats recommended.
Bituproof FLX SA is available in 18 and 200 litre drums.
Bituproof FLX SA has a shelf life of 12 months from date of manufacture if stored at temperatures between 5oC and 40oC.
- Bituproof FLX SA matches the physical properties of ASTM D1227-13, Type III, Class 2.
- Bituproof FLX SA complies with ASTM C309 as a curing compound when applied with two coats at a rate of 4 m2/litre per coat.