Strongcoat PE730
Two component high solids coal tar epoxy coating
Strongcoat PE730 is a two component amine cured high solids coal tar epoxy. The product has excellent chemical resistance and adhesion properties which makes it particularly suitable for sewage treatment plants, chemical plants and for aggressive environments.
Strongcoat PE730 is suitable for use on concrete and steel surfaces.
Downloads
Strongcoat PE730_0.pdf
TDS
Strongcoat PE730 - Base_MSDS_0.pdf
SDS_Base
Strongcoat PE730 - Hardener_MSDS_0.pdf
SDS_Hardener
Strongcoat PE730_MS.pdf
MS
- Excellent adhesion to concrete and steel surfaces.
- High film build up to 350 microns in one coat.
- Excellent water and salt water resistance.
- Cost effective; does not require primer.
- Low residual odour.
- Suitable for use as a waterproof coating.
- High chemical resistance.
- Does not support bacterial growth.
- High abrasion resistance.
- Contains 70% epoxy resin and 30% coal tar in the cured liquid part of the product.
Strongcoat PE730 is designed for use in applications such as:
- Sewage treatment plants and chemical plants.
- Protection of concrete and steel structures submerged in sea water or exposed to tidal or splash zones.
- Lining of manholes, pipes, jetties, piers, ducting and foundations waterproofing.
0.7 kg/m² per coat to achieve 350 microns dry film thickness. Two coats should be applied to achieve 700 microns dry film thickness.
Strongcoat PE730 is available in 25 kg packs (18.5 ltr).
Strongcoat PE730 has a shelf life of 12 months from date of manufacture if stored in dry conditions at a temperature of 25⁰C in original unopened packs.
