Repcoat
One component water based acrylic elastomeric protective anti carbonation coating system
Repcoat is a high build elastomeric, microporous coating exhibiting excellent resistance to attack from carbon dioxide, airborne chlorides and acid rain, with exceptional weathering resistance.
Repcoat has excellent crack bridging properties, yet provides a smooth protective, decorative coating for concrete and other masonry surfaces. For effective anti-carbonation protection a two-coat treatment is recommended after the application of the silane siloxane based impregnating primer. The product is formulated to give a tough flexible and coloured coating which will give a waterproofing coating to a wide variety of substrates. A textured finish may be obtained if required.
- High build elastomeric, microporous coating.
- Excellent resistance to carbon dioxide, airborne, chlorides and water borne.
- Exceptional weathering resistance.
- Excellent crack bridging properties.
- Protective and decorative coating.
- Excellent waterproofing characteristics.
- Bridge abutments.
- External concrete surfaces of storage tank and masonry surfaces.
- Multistory building and villas.
- Where a high external tough coating is required.
- Concrete cladding.
Repcoat: 0.38 litre/m² per coat to achieve 200 microns dry film thickness.
Repcoat Pimer: 0.1 - 0.2 litre/m², depending on the substrate porosity.
Repcoat is available in 20 litre drums.
Repcoat Primer is available in 5 and 20 litre drums.
Repcoat should be stored under dry warehouse conditions at temperatures between 10°C and 35°C.
Repcoat and Repcoat Primer have a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums.
Repcoat complies with the requirements of EN 1504-2 Surface Protection Systems Principles 1.3, 2.2 and 8.2.
