Strongcoat Topping
Trowelled epoxy floor screed
Strongcoat Topping is a three-pack solvent free, epoxybased topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.
Strongcoat Topping is applied by trowel and can be laid to falls. It has a very good durability towards pedestrian and vehicular traffic and a very good resistance towards many of the chemicals commonly found in an industrial environment (consult Technical for further details).
Strongcoat Topping can be supplied in a variety of colours, It is also available in a decorative quartz finish (consult our Sales Department for details).
- Extremely hard wearing system.
- Solvent free.
- Non-slip.
- Available in a wide range of attractive colours.
- Available in a decorative quartz finish.
- Resist a wide range of chemicals, consult DCP technical department for more details.
Strongcoat Topping is used to provide a hygienic, dense and extremely hard wearing surface for concrete floors for a wide range of applications such as:
- Heavy industry factories.
- Aircraft hangars.
- Paint workshops.
- Steel works.
- Dairies.
- Chemical factories.
- Oil refineries.
Approximately 2.95 m² per kit at 5 mm thick.
Strongcoat Topping is available in 30 kg bags.
Strongcoat Topping has a shelf life of approximately 24 months if stored in unopened containers at temperatures between 5°C and 30°C under dry and good conditions.
Strongcoat Topping complies with the requirements of EN 13813, SR-ARO.5-B2.0-IR10.
