Cemflow Base
Pump or hand applied base screed
Cemflow Base is a self-smoothing, dimensionally stable, fast drying, pump or hand applied base screed for use under Cemflow Topping or resin-based materials where thicker applications are required when upgrading and renovating new and existing internal floors.
Cemflow Base is supplied as a pre-blended dry powder designed for applications between 195 to 1965 mils (5 mm to 50 mm) (in one application) to provide a sound base.
Typically, Cemflow Base can be pumped up to 9685 ft² (900 m²) per day. Coverage of 4305 ft² (400 m²) can be achieved when hand applied, dependent upon manpower and equipment used.
- Single component, requires only addition of water.
- Fast setting.
- Easy and fast application.
- Excellent adhesion.
- High coverage efficiency.
- Thick application potential.
Cemflow Base is suitable for use in a wide range of industrial environments such as warehouses, food processing plants etc.
It is important to note that Cemflow Base is not a final wearing surface and should be overlaid with a minimum 195 mils (5 mm) application of Cemflow Topping or a resin-based coating or screed, where a wearing surface is required.
A 50 lb (22.7 kg) bag using 1 US gal (3.8 litres) of clean water will yield approximately 3.3 US gal (12.5 litres).
A 50 lb (22.7 kg) pack of Cemflow Base will cover approximately 14 ft² (1.3 m²) at 390 mils (10 mm) thickness.
50 lb (22.7 kg) paper sacks.
Protect from frost and store under dry warehouse conditions at a temperature between 50oF and 86oF (10oC and 30oC).
6 months in unopened bags and stored under good conditions.
