Quickmast® Anchor E
Epoxy resin cartridge system for anchoring (Formerly known as Keyfix E)
Quickmast Anchor E is a two component high strength pure epoxy resin anchoring grout pre-packed in dual cartridge system with fast curing rate.
Quickmast Anchor E is formulated for permanent installation of steel reinforcement bars and threaded rods into concrete substrates in structural applications.
- Exceptional rapid strength development.
- Resistant to dynamic loading.
- Exceptional high compressive.
- Extremely dense.
- Exceptional bond to concrete and steel surfaces.
- Suitable for dry and damp concrete holes.
- Good chemical resistance.
- High ultimate and early strengths.
Quickmast Anchor E is ideally designed for use in the following applications:
- Permanent installation of reinforcement starter bars and dowel bars.
- Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors
Quickmast Anchor E is available in 20.2 fl. oz (600 ml) twin cartridge system.
Quickmast Anchor E has a shelf life of 24 months from the date of manufacture if stored in its original packaging, the correct way up and in cool dry conditions 50°F - 75°F (10°C - 25°C) out of direct sunlight.
The technical properties and usages of this product may be adversely affected if these conditions are exceeded. Technical Department should be contacted for advise.
Quickmast Anchor E complies with the requirements of ASTM C881 as Type I & IV, Grade 3, Class C.