Cookie Consent by

Quickmast® Anchor E

Epoxy resin cartridge system for anchoring (Formerly known as Keyfix E)

Quickmast Anchor E is a two component high strength pure epoxy resin anchoring grout pre-packed in dual cartridge system with fast curing rate.
Quickmast Anchor E is formulated for permanent installation of steel reinforcement bars and threaded rods into concrete substrates in structural applications.

Quickmast Anchor E_TDS_1.pdf
Quickmast Anchor E - Base_MSDS_2.pdf
Quickmast Anchor E - Hardener_MSDS_2.pdf
Quickmast Anchor E_MS_5.pdf
  • Exceptional rapid strength development.
  • Resistant to dynamic loading.
  • Exceptional high compressive.
  • Extremely dense.
  • Exceptional bond to concrete and steel surfaces.
  • Suitable for dry and damp concrete holes.
  • Good chemical resistance.
  • High ultimate and early strengths.

Quickmast Anchor E is ideally designed for use in the following applications:

  • Permanent installation of reinforcement starter bars and dowel bars.
  • Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors

Quickmast Anchor E is available in 20.2 fl. oz (600 ml) twin cartridge system.

Quickmast Anchor E has a shelf life of 24 months from the date of manufacture if stored in its original packaging, the correct way up and in cool dry conditions 50°F - 75°F (10°C - 25°C) out of direct sunlight.
The technical properties and usages of this product may be adversely affected if these conditions are exceeded. Technical Department should be contacted for advise.

Quickmast Anchor E complies with the requirements of ASTM C881 as Type I & IV, Grade 3, Class C.