Sethard S
Liquid densifier for concrete surfaces
Sethard S is a concentrated, clear, liquid surface hardener and dust proofer designed for application to concrete and other cementitious floors. Sethard S is based on an aqueous solution of sodium silicate and wetting agents to enhance surface penetration.
Sethard S is mixed with water and applied to concrete surfaces. Use of Sethard S will increase abrasion resistance and reduce dusting of concrete surfaces.
- Improves abrasion resistance.
- Single component.
- Durable.
- Cost effective.
- Easy application.
- Does not discolor the concrete.
Sethard S is recommended for new and old cementitious surfaces, such as concrete floors and granolithic paving. It should not be used to renovate concrete which is already disintegrating. Typical applications include:
- Factories.
- Warehouses.
- Garages.
Approximately 300 - 400 ft²/gal (7.3 - 9.8 m²/litre) per coat, depending on the texture and absorption characteristics of the surface.
Sethard S is available in 5 gal (18.9 litre) pails and 55 gal (208.2 litre) drums.
Store in a dry area out of direct sunlight at temperatures between 41°F (5°C) and 95°F (35°C). Sethard S has a shelf life of 12 months from date of manufacture if stored in proper conditions and unopened packs. The effectiveness of this product may be adversely affected if these conditions are exceeded. DCP Technical Department should be contacted for advise.
