Flo-Grout EBG
High strength pourable epoxy foundation resin grout
Flo-Grout EBG is a high strength, non-shrink, pourable epoxy resin grout suitable for grouting gaps with thicknesses between 3 mm - 50 mm.
Flo-Grout EBG is a two component system suitable for heavy dynamic and cyclic loads.
Downloads
Flo-Grout EBG_TDS.pdf
TDS
Flo-Grout EBG - Base_MSDS.pdf
SDS_Base
Flo-Grout EBG - Hardener_MSDS.pdf
SDS_Hardener
- Resistant to dynamic loading.
- Non-shrink and low creep characteristics under continuous loading.
- Exceptionally high compressive, flexural and tensile strengths.
- Extremely dense with crack resistance.
- Exceptional bond to concrete and steel surfaces.
- Good chemical resistance.
- High early strength development allowing for rapid installation.
Flo-Grout EBG is ideally designed for use in the following applications:
- Machine base plates.
- Heavy crane rails.
- Pile top waterproofing.
- Bearing plinths.
- High speed turbines.
- Grouting areas where occasional chemical spillage may occur.
Flo-Grout EBG is with 5.4 kg (3 litre).
Flo-Grout EBG has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.
Approximately 3 litre for the full unit.