Cookie Consent by FreePrivacyPolicy.com

Flo-Grout EP260

High strength pourable epoxy resin grout

Flo-Grout EP260 is a three component, high strength, free flowing, epoxy resin grout. Flo-Grout EP260 is suitable for grouting gaps with thicknesses between 10 - 80 mm.

Downloads
Flo-Grout EP260_TDS_0.pdf
TDS
Flo-Grout EP260 - Base_MSDS_3.pdf
SDS_Base
Flo-Grout EP260 - Filler_MSDS_3.pdf
SDS_Filler
Flo-Grout EP260 - Hardener_MSDS_3.pdf
SDS_Hardener
  • Resistant to dynamic loading.
  • Non-shrink and low creep characteristics under continuous loading.
  • Exceptionally high compressive, flexural and tensile strengths.
  • Extremely dense.
  • Exceptional bond to concrete and steel surfaces.
  • Good chemical resistance.
  • High early strength development allowing for rapid installation.

Flo-Grout EP260 is ideally designed for use in the following applications:

  • Machine base plates.
  • Heavy crane rails.
  • Pile top waterproofing.
  • Bearing plinths.
  • High speed turbines.
  • Grouting areas where occasional chemical spillage may occur.

Flo-Grout EP260 is available in 10 kg/5 litre packs.

Flo-Grout EP260 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.

Approximately 5 litre per 10 kg pack.