Flo-Grout EP330
High strength low exothermic pourable epoxy resin grout
Flo-Grout EP330 is a three component, high strength, low exothern and free flowing epoxy resin grout. Flo-Grout EP330 is suitable for grouting large gaps from 10 - 400 mm at high ambient temperatures of up to 50°C.
Downloads
Flo-Grout EP330_TDS_1.pdf
TDS
Flo-Grout EP330 - Base_MSDS_3.pdf
SDS_Base
Flo-Grout EP330 - Filler_MSDS_3.pdf
SDS_Filler
Flo-Grout EP330 - Hardener_MSDS_3.pdf
SDS_Hardener
- Low heat generating grout for large gaps and high ambient temperatures.
- Resistant to dynamic loading.
- Non-shrink and low creep characteristics under continuous loading.
- Exceptional high compressive, flexural and tensile strengths.
- Extremely dense.
- Exceptional bond to concrete and steel surfaces.
- Good chemical resistance.
- High ultimate and early strengths.
Flo-Grout EP330 is ideally designed for use in the following applications:
- Machine base plates.
- Heavy crane rails.
- Bearing plinths.
- Anchoring of steel fixings.
- High speed turbines.
- Grouting areas where occasional chemical spillage may occur.
Flo-Grout EP330 is available in 15 kg packs (7.5 litre).
Flo-Grout EP330 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.
