Flo-Grout EP260
High strength pourable epoxy resin grout
Flo-Grout EP260 is a three component, high strength, free flowing, epoxy resin grout. Flo-Grout EP260 is suitable for grouting gaps with thicknesses between 10 – 100 mm at ambient temperatures between 5 - 35oC.
Downloads
Flo-Grout EP260_TDS.pdf
TDS
Flo-Grout EP260 - Base_MSDS_0.pdf
SDS_Base
Flo-Grout EP260 - Filler_MSDS_0.pdf
SDS_Filler
Flo-Grout EP260 - Hardener_MSDS_0.pdf
SDS_Hardener
Flo-Grout EP260_MS.pdf
MS
- Resistant to dynamic loading.
- Non-shrink and low creep characteristics under continuous loading.
- Exceptionally high compressive, flexural and tensile strengths.
- Extremely dense.
- Exceptional bond to concrete and steel surfaces.
- Good chemical resistance.
- High early strength development allowing for rapid installation.
Flo-Grout EP260 is ideally designed for use in the following applications:
- Machine base plates.
- Heavy crane rails.
- Pile top waterproofing.
- Bearing plinths.
- High speed turbines.
- Grouting areas where occasional chemical spillage may occur.
Flo-Grout EP260 is available in 20 kg packs.
Flo-Grout EP260 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.
Approximately 10 litre/20 kg pack.
