Flo-Grout EP280
High strength fast flow epoxy resin grout
Flo-Grout EP280 is a three component, high strength, free fast flowing, epoxy resin grout. Flo-Grout EP280 is suitable for grouting gaps with thicknesses between 10 - 40 mm at ambient temperatures between 10 to 40oC.
Downloads
Flo-Grout EP280_TDS.pdf
TDS
Flo-Grout EP280 - Base_MSDS.pdf
SDS_Base
Flo-Grout EP280 - Filler_MSDS.pdf
SDS_Filler
Flo-Grout EP280 - Hardener_MSDS.pdf
SDS_Hardener
- Resistant to dynamic loading.
- Non-shrink and low creep characteristics under continuous loading.
- Exceptionally high compressive, flexural and tensile strengths.
- Extremely dense.
- Exceptional bond to concrete and steel surfaces.
- Good chemical resistance.
- High early strength development allowing for rapid installation.
Flo-Grout EP280 is ideally designed for use in the following applications:
- Machine base plates.
- Heavy crane rails.
- Pile top waterproofing.
- Bearing plinths.
- High speed turbines.
- Grouting areas where occasional chemical spillage may occur.
Flo-Grout EP280 is available in 20 kg packs.
Flo-Grout EP280 has a shelf life of 12 months from date of manufacture if stored at temperatures between 5°C and 35°C.
Approximately 10.25 litre/20 kg pack.
Flo-Grout EP280 complies with EN 1504, Part 3, Class R4 as concrete structural and non-structural repair material (based on epoxy resin).