Cookie Consent by FreePrivacyPolicy.com

Hyperplast ES901

High performance early strength concrete hyperplasticiser (Formerly known as Hyperplast PC901)

Hyperplast ES901 is a high performance early strength concrete hyperplasticising admixture based on polycarboxylic polymers with long chains specially
designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Hyperplast ES901_TDS_0.pdf
TDS
Hyperplast ES901_MSDS_7.pdf
SDS
  • Optimises cement utilization.
  • High density and impermeable concrete through extreme water reduction.
  • Improves shrinkage and creep behaviors.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Higher early and ultimate compressive strengths.
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • High strength and high performance concrete.
  • Structures with congested reinforcement.
  • Pre-cast concrete.
  • Improved cohesion allowing for use in mass concrete pours and piling.
  • Self compacting concrete.

Hyperplast ES901 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.

Hyperplast ES901 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Hyperplast ES901 is 0.5 to 3.0 litre per 100kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Trials should be conducted to determine the optimum dosage of Hyperplast ES901 to meet the performance requirements by using the materials and conditions in actual use.

Hyperplast ES901 complies with ASTM C494 Type F & E, depending on dosage used.