Hyperplast ES905
High performance early strength concrete hyperplasticiser
Hyperplast ES905 is a high performance early strength concrete hyperplasticising admixture based on polycarboxylic polymers with long chains specially
designed to enable reduction in the water content of the concrete to perform more effectively.
This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
- Resistance to carbonation.
- Optimises cement utilization.
- High density and impermeable concrete through extreme water reduction.
- Improves shrinkage and creep behaviors.
- Minimises segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths and flexural strength.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Require less vibration, improving the out put.
- High strength and high performance concrete.
- Structures with congested reinforcement.
- Pre-cast concrete.
- Improved cohesion allowing for use in mass concrete pours and piling.
- Self compacting concrete.
- Hollow core concrete.
Hyperplast ES905 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast ES905 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast ES905 is 0.5 to 3.0 litre per 100kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Trials should be conducted to determine the optimum dosage of Hyperplast ES905 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast ES905 complies with ASTM C494 Type A, F & E, depending on dosage used.
