Hyperplast PC570
High performance polycarboxilic based, concrete superplasticiser
Hyperplast PC570 is a high performance superplasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.
This effect can be used in high strength, low w/c ratio and flowable concrete mixes, to achieve highest concrete durability and performance in the readymix and precast concrete industries.
- Optimises cement utilisation.
- Improves shrinkage and creep behaviors.
- High density and impermeable concrete through very high water reduction.
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
- Minimises segregation and bleeding problems by improving cohesion.
- Higher early and ultimate compressive strengths.
- High strength and high performance concrete.
- Pre-cast concrete.
- Improved cohesion allow for use in mass concrete pours and piling.
- High durability concrete.
- Structures with congested reinforcement.
- Self compacting concrete.
Hyperplast PC570 is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Hyperplast PC570 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.
The guidance dosage of Hyperplast PC570 is 0.5 - 2.5 liters per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.
Representative trials should be conducted to determine the optimum dosage of Hyperplast PC570 to meet the performance requirements by using the materials and conditions in actual use.
Hyperplast PC570 complies with BS EN 934-2 : Table 3.1, Table 3.2 and ASTM C494, Type F.
