Cookie Consent by FreePrivacyPolicy.com

Hyperplast PC352

High performance concrete admixture based on polycarboxylic polymers

Hyperplast PC352 is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.

Downloads
Hyperplast PC352_TDS.pdf
TDS
Hyperplast PC352_MSDS.pdf
SDS
  • Optimises cement utilization.
  • High density and impermeable concrete through very high water reduction.
  • Improves shrinkage and creep behaviors.
  • Minimises segregation and bleeding problems by improving cohesion.
  • Higher early and ultimate compressive strengths.
  • Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability.
  • To produce high quality concrete of improved durability and water tightness.
  • High strength and high performance concrete.
  • Improved cohesion allow for use in mass concrete pours and piling.

Hyperplast PC352 is available in 25 litre jerrycan, 210 litre drums and 1000 litre bulks supply.

Hyperplast PC352 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

The guidance dosage of Hyperplast PC352 is 0.5 - 2.5 litre per 100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica.

Representative trials should be conducted to determine the optimum dosage of Hyperplast PC352 to meet the performance requirements by using the materials and conditions in actual use.

Hyperplast PC352 complies with ASTM C494, Type G.