Hyperseal DPS-200
One component hydrophilic sealant
Hyperseal DPS-200 is an elastic water-swellable paste which is applied like a sealant. The hydrophilic properties of Hyperseal DPS-200 display good consistency and swell rate during repeated wet/dry cycling. The expansion of the product when in contact with water creates positive pressure against the faces of the concrete joint, thus preventing the passage of water.
Downloads
Hyperseal DPS-200_TDS_0.pdf
TDS
Hyperseal DPS-200_MSDS_5.pdf
SDS
- Fast curing – Enables early concrete pour and rapid return to service.
- Excellent seal on rough concrete: Gives improved water tightness.
- Excellent adhesion – Quick and easy to apply to a variety of damp and uneven joint surfaces remaining firmly in place during concrete pour.
- Water swellable – Has an unconfined expansion of 100%, thus producing a watertight compression seal.
- Durable – Excellent wet/dry cycling retaining elastic character and swelling performance due to high tolerance of the cementitious environment.
- Sustain an effective seal in submerged environments.
- Hyperseal DPS-200 can be used as an adhesive for bonding Hyperseal DP strips or as problem-solving hydrophilic sealant in difficult access areas including sealing around joints in pre-cast manhole, covers, cable, ducts and pipes, etc.
- Sealing around pre-cast segments.
- Sealing between rough surfaces, e.g. slurry walls and concrete slabs.
- Sealing around H-beams and other penetration through concrete structures.
- Sealing around conventional rubber and plastic waterstop to provide belt and braces seal prior to concrete pour.
- Sealing in water towers and water storage tanks.
Each 600 ml sausage will provide enough material for approximately 6.5 m when gunned to form a constant 10 mm diameter bead.
600 ml/sausage.
Hyperseal DPS-200 should be stored in its original unopened package in cool, dry conditions at temperatures between 5°C to 30°C, away from direct sunlight and protected from rain and frost.
