Cookie Consent by FreePrivacyPolicy.com

Strongcoat EPU100

High performance flexible epoxy polyurethane resin protective coating

Strongcoat EPU100 is high performance floor and wall coating based on hybrid combination of epoxy polyurethane resins. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use.

Strongcoat EPU100 is easily sprayed, brushed or rolled to concrete and steel substrates in a two coat application, typically applied at a wet film thickness of 200 - 250 microns per coat without sagging. Strongcoat EPU100 is available in a standard grey colour, other colours are available subject to minimum order
quantities.

Downloads
Strongcoat EPU100 - Base_MSDS_6.pdf
SDS_Base
Strongcoat EPU100 - Hardener_MSDS_6.pdf
SDS_Hardener
Strongcoat EPU100_2.pdf
MS
  • Flexible coating.
  • Environment friendly – totally free of carcinogenic materials like coal tar, pitch and aromatic hydrocarbons.
  • Cost saving – primerless system, easy brush, roller or spray application.
  • Impermeable waterproof coating.
  • Protects sub-structures as well as superstructures against weathering and environmental attacks.
  • Excellent chemical resistance, as well as resisting algae and bacterial growth.
  • UV resistant. Colour change may occur under direct sunlight without affecting the performance.

Provides chemical and abrasion resistance to prevent corrosion of concrete and steel surfaces for applications such as:

  • Wall and floor protective coating.
  • Protection system for car park decks.
  • Manhole and pipe lining.
  • Secondary containments.
  • Lining for sewage and effluent plants.
  • Lining of aeration and sludge tanks.
  • Sea water tanks, channels and intakes.
  • Foundation waterproofing.
  • Reservoirs, water treatment plants.

The coverage rate is 0.29 kg/m2 @ 200 microns.

Strongcoat EPU100 is available in 14 kg packs (10 litre).

Strongcoat EPU100 has a shelf life of 12 months from date of manufacture if stored in warehouse conditions below 35oC.

Strongcoat EPU100 complies with the requirements of EN1504-2 Surface Protection Systems for Coatings (C) Principles 2.2 and 5.1.