Cookie Consent by FreePrivacyPolicy.com

Strongcoat SL1

1 - 2 mm thick epoxy self leveling topping for floor surfaces

Strongcoat SL1 is a solvent free, epoxy-based self leveling topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.Strongcoat SL1 is applied by trowel to horizontal surfaces and has very good durability towards pedestrian and vehicular traffic.

It also has very good resistance to many of the chemicals commonly found in an industrial environment (consult our Technical Department for further details).

It can be supplied in a variety of colours (consult our Sales Department for details). Strongcoat SL1 cures to a durable, hard wearing surface.

Downloads
Strongcoat SL1_TDS_4.pdf
TDS
Strongcoat SL1 - Base_MSDS_4.pdf
SDS_Base
Strongcoat SL1 - Filler_MSDS_3.pdf
SDS_Filler
Strongcoat SL1 - Hardener_MSDS_2.pdf
SDS_Hardener
Strongcoat SL1_MS_4.pdf
MS
Advantages
  • Provides hygienic floor.
  • Hard wearing system.
  • Solvent free.
  • Available in a wide range of attractive colours.
  • Resist a wide range of chemicals, consult DCP technical department for more details.
Applications

Strongcoat SL1 is used to provide a hygienic, dense and hard wearing surface for concrete floors for a wide range of applications such as:

  • Aircraft hangars.
  • Hospitals.
  • Pharmaceutical factories.
  • Showrooms.
  • Laboratories.
  • Medium or light duty industrial plants.
  • Kitchens.
Coverage

A) Typical smooth finish:
Strongcoat Primer S: 1 coat @ 175 microns (DFT).
Strongcoat SL1: 1000 - 2000 microns (DFT) per layer.

B) Typical Antislip Finish (indoor and outdoor):
Strongcoat Primer S: 1 coat @ 175 microns (DFT).
Strongcoat SL1: 1000 - 2000 microns (DFT) per layer.
Antislip Aggregate No.2 or 3: 1 - 3 kg/m2.
Repcoat P: 1 - 2 coats @ 75 - 100 microns (DFT) per coat.

Packaging

Strongcoat SL1 is available in 17 kg packs (10.5 litre).
Strongcoat Primer S is available in 5 kg packs.

Storage

Strongcoat SL1 and Primer have a shelf life of 12 months from date of manufacture if stored at temperatures between 10°C and 35°C.

The material may form crystals when stored at temperatures below 10˚C, in such cases, conditioning for 1 - 2 days at temperatures between 30 - 35˚C with simple manual mixing is needed before application.

Standards
  • Strongcoat SL1 complies with EN 13813, SR-B1.5-AR0.5-IR2.9.