Cemflow Industrial
Industrial grade floor topping
Cemflow Industrial is a self-smoothing, dimensionally stable, and fast drying industrial grade floor topping for upgrading and renovating new and existing internal floors.
Cemflow Industrial is supplied as a pre-blended dry powder designed for application between 5 mm to 15 mm (in one application) to provide a finished industrial floor. Cemflow Industrial is also available in a different grade (Cemflow Industrial HT) which allows it to be applied at thickness ranging between 5 mm and 30 mm.
Typically Cemflow Industrial can be pumped up to 1500 m² per day. Coverage of 600 m² can be achieved when hand applied, dependent upon manpower and equipment used.
Cemflow Industrial is recommended to be sealed in areas where water may come into direct contact with the cured material. Cemflow Industrial may be sealed with Strongcoat WD water based epoxy coating, or if a matt finish is required Cemflow Sealer can be used. (Further information is available from our Technical Department or the Product Data Sheets).
- Single component, requires only addition of water.
- Fast setting.
- Easy and fast application.
- Excellent adhesion.
- Excellent abrasion resistance.
Cemflow Industrial is suitable for use in a wide range of industrial environments such as warehouses, food processing plants etc. subjected to medium to heavy traffic.
A 25 kg pack of Cemflow Industrial will cover approximately 2.75 m² at 5 mm thickness.
Cemflow Industrial is available in 25 kg bags.
Cemflow Industrial has a shelf life of 6 months from date of manufacture if stored at tempertatures between 10oC and 30oC in unopened bags and under dry warehouse conditions.
Protect from frost.
A 25 kg bag using 4.5 litres of clean water will yield approximatey 14.0 litres
Cemflow Industrial complies with EN 13813, Class CTC40-F7-AR2.
