Cemflow Sealer
Water-based, polyurethane concrete and screed sealer
Cemflow Sealer is a clear, two-component, waterdispersed polyurethane matt sealer designed to protect and seal Cemflow screeds and concrete surfaces, providing an abrasion resistant, hygienic and durable floor. The application of Cemflow Sealer helps to protect the floor surface and ease maintenance by reducing the adhesion of dirt and other debris, whilst eliminating dusting. Cemflow Sealer is available in satin and matt finishes.
Cemflow Sealer can also be used as sealer over existing epoxy/polyurethane flooring systems, to improve slip and abrasion resistance, as well as provide an anti-stain matt finish. Cemflow Sealer cures by a chemical crosslinking reaction, providing durability, toughness and chemical resistance that far exceeds that of one-component acrylic or polyurethane sealers.
- Excellent UV stability, non-yellowing.
- Provides a slip resistant matte finish.
- Extremely easy to clean and maintain.
- Low VOC content, and low odour.
- Resistant to many of the chemicals commonly found in industrial applications.
- Water based, environmentally friendly.
- Excellent abrasion and scratch resistance.
- High bond strength to porous and non-porous substrates.
- Excellent water and stain resistance, prevents penetration of oils and liquids.
- Excellent resistance to dust and dirt pick up.
- Available in satin and matt finishes.
Cemflow Sealer is designed to seal a variety of Cemflow, Strongcoat and Griptop flooring systems, as well as screeds in the following:
- Retail spaces such as stores and showrooms.
- Health care facilities such as hospitals and clinics.
- Business facilities such as offices and lobbies.
- Museums, theatres and shopping malls.
- Educational premises such as universities, schools and colleges.
- Industrial facilities such as warehouses, production, maintenance and assembly areas.
- General food processing and manufacturing plants.
On absorbent surfaces, Cemflow Sealer should be diluted 1:3 with water and applied as a primer at a rate of 10 m² per litre of diluted material. Subsequent coats should be applied neat.
The typical coverage of subsequent coats is 10 m² per litre of neat material.
Note: Coverage rates are approximate and will vary according to amount of overcoating during application and substrate porousity. Each subsequent coat will generally require less material.
Cemflow Sealer is available in 5 kg kits.
Cemflow Sealer has a shelf life of 6 months from date of manufacture if stored in dry conditions at temperatures between 5 – 30oC, in original unopened containers and under good conditions.
