Stopdust

Stopdust is applied by roller, brush or squeegee in one or more coats and dries to a clear, dust-free and hygienic finish. It has good durability to pedestrian and vehicular traffic.

• Good penetration.
• Can be applied to freshly hardened concrete.

Approximately 10m² per kg per coat.

• This figure is based on application to a smooth dense surface. Coverage will vary according to the texture, porosity and evenness of the surface to which Stopdust is being applied. It is recommended that a test application be carried out to determine the precise coverage rate for each job. For particularly porous surfaces add 1 part of clean cold water to 4 parts of Stopdust and shake well before use.

25kg

Store at temperatures between 5°C and 30°C.

Approximately 12 months if stored in unopened containers under good conditions.