Bituproof 40S
Water based rubberised bitumen coating
Bituproof 40S is a black/brown emulsified cold applied bitumen liquid, acting as dampproof, vapour barrier for concrete and masonry, and as a general purpose primer for bituminous membranes.
Downloads
Bituproof 40S_MS_1.pdf
MS
Bituproof 40S_TDS_0.pdf
TDS
Bituproof 40S_MSDS_12.pdf
SDS
- Resists attack by chlorides and sulphate ions present in ground water.
- Easy to use.
- Economical.
- Water base, has no solvents.
- Does not rot.
Bituproof 40S provides a vapour barrier, protective coating, and curing compound for:
- Under ground concrete foundations.
- Concrete and masonry block walls.
- Walls below cladding systems.
- Concrete slabs.
- Basement walls.
- Works as a primer for concrete, masonry surfaces, before applying waterproofing bituminous membranes.
3 - 5 m²/litre per coat, to achieve a dry film thickness of around 70 - 110 microns per coat, depending on surface roughness.
Bituproof 40S is available in 18 and 200 litre drums.
Store away from direct sunlight, and protect from freezing.
Bituproof 40S has a shelf life of 12 months from date of manufacture if stored in proper conditions.
Bituproof 40S complies with ASTM D1227-95, Type II, Class 2.
