Bituproof 50R
Water based latex rubberised bitumen protective coating
Bituproof 50R is a black/brown emulsified bitumen liquid reinforced with latex rubber, acting as damp-proof, vapour barrier and protective coating for concrete and masonry.
Downloads
Bituproof 50R_TDS_0.pdf
TDS
Bituproof 50R_MSDS_2.pdf
SDS
Bituproof 50R_MS_0.pdf
MS
- Resists attack by chlorides and sulphate ions present in ground water.
- Applied by brush which make it easy to use.
- Economical.
- Water based, has no solvents.
- Asbestos free.
- Does not rot.
- Non-sag, up to 0.7 mm wet film thickness.
Bituproof 50R provides a vapour barrier, protective coating, and curing compound for:
- Under ground concrete foundations.
- Concrete and masonry block walls.
- Walls behind cladding systems.
- Concrete slabs.
- Basement walls.
3 - 5 m²/litre per coat, to achieve a dry film thickness of around 70 - 110 microns per coat, depending on surface roughness.
Bituproof 50R is available in 18 and 200 litre drums.
Bituproof 50R has a shelf life of 12 months from date of manufacture if stored in proper conditions.
- Bituproof 50R complies with ASTM D1227-95, Type II, Class 2.
- Bituproof 50R complies with ASTM C309-93 when applied with two coats at a rate of 2 m²/litre.
